CSP and Delegated Admin security concerns: MFA is great, but what about the several outstanding Microsoft limitations?
Bringing-forward from https://www.yammer.com/office365partners/?show_login=true#/Threads/show?threadId=145300852449280... (Why the multiple communities here? Which is the go-forward platform here, Yammer or microsoftpartnercommunity.com ?)
How to support CSP customers while protecting the security of their tenant? Critical for security-conscious customers, and/or those with high-security requirements. Permissions granted by delegated admin are too far-reaching, do not allow for fine-grained access, and even the ability to audit use is unclear or non-existent.
This is something I had first started looking at just over a year ago. It doesn't look like anything has improved since, but customers are understandably only becoming increasingly concerned with this.
Here is some feedback we just received earlier today from a current customer looking to move to CSP licensing:
> Even with a NDA with <direct CSP provider> I am not at all comfortable making a third party of a third party delegated admins for our environment and granting them the ability to access all our cloud data which is what the terms state we’d be agreeing to. ... I really like the benefits of CSP otherwise so if there’s some other way to make this work we’d probably still do it. I also have reservations about a vendor having these all-encompassing permissions. I understand it can be needed for some admin tasks and troubleshooting but I don’t like how much of a free for all Microsoft makes it.
(I do believe there is some confusion in the above, in that our direct CSP provider / reseller would not have delegated admin - but only access to contact, subscription, and billing details. However, even this would be good to have further detailed in a format that we can share with concerned customers.)
If I were in the customer's place, I would absolutely be asking the exact same questions, and imposing the same requirements - and have so in prior organizations.
I have several other customers I've been working with, who I have not, in good faith, been able to recommend putting into CSP and the required delegated admin for - given the concerns outlined here.
We currently have a few hundred customers enrolled in CSP - and have an opportunity to bring even more into the CSP program, but the concerns outlined here do not help with the effort.
A number of specific points and concerns:
1) The list of roles and permissions that can be applied through Partner Center are available at https://docs.microsoft.com/en-us/partner-center/permissions-overview . Of these, only "Admin agent", "Helpdesk Agent", and maybe "Sales agent" apply to the customer tenants. "Admin agent" is basically the equivalent of "Global Administrator" within a customer tenant, and "Helpdesk Agent" is effectively a "Helpdesk Administrator" (Password Administrator). The admin roles from a tenant perspective are documented at https://docs.microsoft.com/en-us/office365/admin/add-users/about-admin-roles . As an O365 admin in my own organization, I can delegate permissions to others through at least 262,144 different combinations of the 18 customized administrator roles currently available in my tenant. (This increases to 38 roles available and nearly 275 billion combinations when using the roles available in Azure AD.) As a partner with delegated admin to a customer, there are only 2: "Everything", or "Helpdesk Agent" (or none). See also: https://www.yammer.com/office365partners/#/Threads/show?threadId=119473804279808 and https://www.yammer.com/office365partners/#/Threads/show?threadId=804328021 .
2) Everything is "all or nothing". We also have well over 100 engineers in our organization (not counting back office staff, etc.). To assign either "Admin agent" or "Helpdesk Agent" to one of our staff, means that they have that same permission across a few hundred customers. There is no way to filter a staff member's access to only one customer, or ideally a group of customers. (While we do have some additional flexibility in granting access through guest accounts in Azure AD, these permissions do not carry over to / are not usable in O365.)
3) We could consider falling-back to the use of extended and manually-reviewed audit logging as a compensating control. However, there are many limitations here - including that all logging appears to be held within each individual customer tenant only - and for us to review delegated admin activity from our partner account as a whole, it appears that we'd need to query each and every one of our customer tenants. Further concerns are raised here at https://www.yammer.com/office365partners/#/Threads/show?threadId=62199238885376 (unanswered).
While I'm on the topic, the "pretty wicked security hole" documented at https://office365.uservoice.com/forums/264636-general/suggestions/33233917-powershell-mfa-for-csp-delegated-admin-privileges also still needs to be addressed, well over a year later now. Can someone from Microsoft please review and respond to this UserVoice entry? Everyone else - please vote...
What are other CSP partners doing in terms of security controls to meet customer needs and expectations as it relates to CSP licensing? (We do have our own internal security program that I am a part of - which includes even stronger MFA controls across our entire organization than we'd otherwise been able to have approved, partially because of the customer security concerns here.)
As per https://blogs.technet.microsoft.com/uspartner_ts2team/2016/04/30/removing-the-csp-as-delegated-admin-in-office-365-customer-tenants/ , it looks like the simplest answer may to just be to have needing customers remove the delegated admin permissions. However: 1) Is this still accurate and working, 3 years later? And 2) we'll need to determine what limitations, if any, may then exist that would prohibit us from providing CSP licensing in this model, even if we then are not able to directly assign new licenses to users, or otherwise provide direct support to the customer as per CSP terms (at least not without having other customer-provided access given to us).
Just looking at this again now, it looks like we *might* be able to put the "Admin agent" and "Helpdesk Agent" roles behind the new "Azure AD entitlement management". This is less than 2 months old, still in preview, and what Privileged Identity Management really should have been all along, in my opinion. It does require Azure AD Premium P2 (or its parent EMS E5 offfering).
@simbur666 : #
Reg. "With that premise, how do I let a printer scan to email, or an unattended Teams app in a meeting room function, without manually enabling / disabling MFA per-user in the old MFA UI? "
Long term this old MFA admin UI will be gone, it is only relevant for basic authentication, and basic authentication will also go away long term. And luckily you don't need it configure exceptions - for AzureAD Security defaults they would not apply anyway, when you use Conditional Access you can confugire those in the CA policies.
Agree, currently there are those challenges, and not every device vendor will be able to solve them short-term. If such an exception is necessary, make it as specific as possible. Push device vendors to support modern authentications, for Teams rooms specifically, while it is modern auth there is special user account that indeed is not leveraging MFA. E.g. when using AzureAD Security defaults, MFA protection would only kick in when you attempt to use this account for interactive authentication.
Reg. "And how about the whole point of Intune compliant devices? If you are nervous to trust a location, then you surely wouldn't trust a device by default, regardless of it's configuration."
I don't agree, there is a fundamental difference - with checking device configuration status you can check the device current health and not assume it is healthy just because it talks from a certain network location - e.g. integrating Device compliance policies with things like (Defender) Endpoint protection status.
Reg. "which is not to annoy users all the time with MFA prompts."
With normal OAuth scenarios, number of MFA prompts is very low, since application usually only need to do MFA once and can then replay & renew tokens, unless configured with a more secure (paranoid ? 😉) setting to shorten the session lifetime. E.g. I need to do MFA for everything, as long as I can log on to Windows using Hello for Business I will hardly notice MFA at all, for most apps. Same on my mobile phone.
Reg. "Surely if an office building has card-based access for employees (or some other physical security for access to premises)," - Might be an option, if both physical side is secured and users have no way to install software ... or receive emails 😁 . Sure, you can provide high security using other measures as well, not saying that there is just one right option. However, for whatever you do, please "assume breach". Customers that do disable security measures just because they assume there can't be a compromised device within their internal network make attackers very happy.
I can fully understand that MFA can be a burden sometimes for users, but there are solution for this. Register more than one app, use app & hardware tokens etc.
@VNJoe : Thank you for your honest feedback. Of course, there is no need to use GDAP, feel free to continue using admin accounts for each customer tenant, AzureAD Security Defaults are enabled for most customer tenants so they can get those alerts you are seeking for free and so non-MFA protected accounts are only available if you bypass the basic security recommendations.
I did not propose the "idea" of using per-customer user accounts as a better workaround, it seems you did misunderstood the context of why I did mention this as one option. And I also think that you misunderstand the concept of GDAP and overestimate the complexity, I'm talking daily to Partners working with SMB customers using the same concept with regard to Azure Lighthouse and are interested in GDAP for the same reason. Your decision of course.
You state that AzureAD Security Defaults are enabled for most tenants, that would be correct, however, it seems to be an all or nothing deal.
For example, if the client requires SMTP auth for a legacy product, the security defaults block this, but can you simply enable SMTP auth while retaining all the other security practices? oh no, you have to turn it all off and pay extra for that customizability just to achieve a similar level of security.
It seems entirely backwards from a security standpoint, I understand you prefer to use modern authentication and I'm with you, but many SMB clients that MSP's have to manage use legacy products or cheaper alternatives to major well renowned brands simply because it makes financial sense for them and we as MSP's are expected to keep things running smoothly where possible.
Could the ability to ONLY allow SMTP auth be an option with a warning? alternatively could we have the ability to setup conditional access rules etc to mimic the Security Defaults behaviour without having to pay for extra rules and Azure licensing in a standard package?
We are all for improving upon best security practices and putting them into place, but when those practices restrict day to day requirements for clients, most times they have to be "worked around" or worse, switched off entirely.
@ITGDaryl : Valid feedback, having this option would certainly make those scenarios easier. The issue is, that investigations show that it is exactly those remaining legacy devices and legacy auth for those that are a known, and broadly used entry point for attackers. Pretty sure that AzureAD team said for this reason that they make no compromise because of this (Actually, there was an option as preview that allowed just that, remember "baseline policies"? But his path was not pursued for a reason). And reg. SMTP AUTH - It might that Exchange Online changes will hit those customers in this regard anyway sooner or later. There is no date for when we announced to disable SMTH Auth via Basic Auth, but it will happen at some point in time. It is now already disabled by default: Basic Authentication and Exchange Online – September 2021 Update - Microsoft Tech Community and for SMTP Auth options see Basic Authentication and Exchange Online – July Update - Microsoft Tech Community
I think, having AzureAD Security Defaults is a huge step forward, it delivers AAD P2 features for free, where before there were no no-cost options at all.
Agreed, ideally it should not be used, however, we can only advise clients or refuse to offer support, we cannot make those decisions for them when they choose to use legacy software.
We have a compromise, turning it off, but in turn it disables all the other default policies such as enforcing MFA for admins and various other beneficial measures all for the sake of being able to use SMTP authentication to send an email from an application, short of setting up some relay as you say (assuming it's financially viable for the client) it becomes a little problematic as we are making the sites less secure for the sake of the client not wanting to spend the money to have something more modern and compatible with the latest security standards.
I just wish that there was an ability to keep the other beneficial security features intact while this was disabled but it seems that will not be possible, we will push to get them updated as always given that support will soon be ending completely.
people to turn them off! Usually for this very reason, thereby opening
themselves up for attack.
In the case you describe, it makes sense to have one WIndows server onsite,
even if it is installed on a NUC or PC tucked away in the broom cupboard.
Then you can use it as an SMTP relay (and for any other things like
wireless controller or security camera software). Connect an EOL connector
for the relay (which is allowed). Then your client is still secure
and can send SMTP from multiple devices.
Then again you should really convince them to get AAD P1 ($8/user), then
you have conditional access and can enable SMTP for one user as you
describe without requiring the relay.
Pretty reasonable pricing for the functionality you are requesting (IMO).
And a final note: Partners are going to continue what you mention, use a global admin account on our customer's tenants instead of attempting to configure 15 roles on hundreds of clients... bypassing this entire process. I haven't used my partner account in years because of how useless it's become.
Again - I really can't understand why there is still no soluton or even notes about possible solutions? 2 years have passed from initial post. Sorry but MS finds time and resources for pointless product rebranding projects but not for critical issue.
And for suggested workaround - I would be more than happy to ask MS to explain to customers why they have to pay for partners' users if they will not grant admin rights for partner.
Sorry, I really can't understand so numb attitude from Microsoft side regarding so serious topic.
For me as Dynamics partner current topic begins to be obstacle to take customers to cloud. But that is what Microsoft wants and where he expects partners should focus.
From customer perspective:
I always have to explain any bigger customer why they need to grant us permissions what in theory allow is to do almost everything. Half of them accept that and half not. For example no international companies grant us such permissions cause they have higher security standards and don't let us see their whole AD. So we have to find alternative solutions.
From Dynamics partner perspective:
We have 60 employees who are serving Dynamics customers on everyday basis. They need to access customer environments and it's possible through Partner Central where are listed all our Dynamics SaaS customers - some of them smaller, some bigger, some members of the exchange etc. And there is no limitation where our people can access. I hope MS understands to what kind of data actually all these people can access and what can be the worst scenario if somebody has bad intensions. Or is just curious. It's highly confidential data starting from financial statements till sales companies pricing information or manufacturing companies self-cost formulas.
OK, the alternative is that Dynamics partner has no delegated rights and will be defined in ERP as ordinary user but then the partner's user is not free of charge anymore. Majority of customer can't understand why they have to pay for partner's users to be able get consultation service.
So I really hope that this topic finds at least some kind of solution asap and keeps improving continuously.
I've come across a few companies deploying Business Central or Dynamics with our customers that have demanded 'Global Admin' permissions that I had intentially removed from the customer tenant after they had accepted the CSP invitation. Most had no understanding of zero-trust, or the rights they required to do their bit, or that giving them access to create users, groups or anything else within the environment should be considered unacceptable if another company manages and is therefore (potentially legally) responsible should an incident occur. Although I know it's 'frustrating' not to have god-level access to get something done, it is how the future will be so we best get used to it. Your customer should be inviting your staff as B2B 'guests', adding them to a group that has the 'Dynamics Admin' role (which is free and allows the initial set up and on-going administration). Yes, you are correct that means they then need a licensed generic 'super user' account within the system, but is that really a big deal? You can pitch from the outset that you will need one licensed account in the system, or even include it in your proposal so that it is absorbed into the implementation costs.
@Leho : As mentioned in before discussion, this is already being worked on.
If you want to give feedback: Join the Partner Center API and SDK Early Adopter Program - Partner Center app developer | Microsoft Docs (not only applicable to API topics, this is where you will learn about upcoming improvements first and where you can give feedback to the PMs)
@AlexCBrewer & All others: This might be of interest for you: https://techcommunity.microsoft.com/t5/small-and-medium-business-blog/announcing-microsoft-365-lighthouse-for-managed-service/ba-p/1698181
This might be the first step in removing some of the limitations and visible effort by the PGs to address specific MSP scenarios in a better way. There is also more to come specifically for CSP Partners, though it will take a while until something will be shared.
@JanoschUlmer Thanks for the mention.
I have seen Lighthouse and we have registered for access to the preview, although at this stage it looks like not much more than a reporting dashboard on the Intune device estate of our clients. I can't see anything, as yet, for AAD user reporting and nothing with regards to actual management on client tenants.
Whilst I do see the benefits Lighthouse will bring us, it does not solve the problems highlighted in this and other threads about how our delegated admin permissions do not give full global admin rights over client tenants which is critical for proper full MSP offerings
As mentioned - "first step" 🙂 For Partners there are also changes on the roadmap.
For Direct CSP and Indirect Providers there is an early adopter program, but I can't currently tell if new Partner will be accepted. See this thread if you have access to the Cloud Partner Yammer network: https://www.yammer.com/cloudpartnercommunity/#/Threads/show?threadId=678930850922496
How about an actual announcement through the normal Partner Announcement channel? How about a more transparent discussion on this directly to the Partners instead of on some bulletin board? The strategies being implemented are creating difficulties in managing SMB customers and eliminating our ability to properly protect and secure them. Partner accounts are all required to have MFA, but tenant accounts do not. That's a gaping hole when partners are creating multiple global admin accounts on thousands of tenants just to be able to provide them proper configuration of Office 365, which is why they are customers. There's no addressing it, the engineers all state this use by design, but there's been no partner announcement at all, and these impactful changes aren't just in some early adopter program.
Auditing activity is obfuscated as well. Instead of seeing a very specific partner user who may have breached security for a client, they see that a generic global admin account did it instead. No accountability.
Can't even filter SPAM for customers at this point...
I have to admit, I have skimmed some of the responses, but heading back to one of the issues regarding Partner Center roles.
I fed back on various other forums and yammer groups that the roles are too broad, and really do not conform to any kind of basic, least priviledge best practice.
We have several departments, some are responsible for certain Microsoft offers/products.
Let's take Dynamics 365 as an example.
We have many customers with Dynamics 365. We may also support their Office 365, and Azure.
What I don't want is the Dynamics team having access to either Office 365, or Azure.
These are the responsibility of different support teams.
Also, what I don't want, is to give every Dynamics 365 team member access to all customers.
Vice versa, I don't want all Office 365 admins having access to Dynamics 365, or Azure.
I have to give all of these users Admin Agent roles, and have no control within Partner Center to decide what or who they have access to.
In addition to this, I don't want any of them to provision or increase/decrease license counts, or onboard new customers.
The roles need to be more granular, and my suggestion was to let Partner create role groups and the permissions for that group. There must also be a way to give either user access only to specific customers, or a simlar mechanism to PIM, where they are only give access when needed, and for a limited period.
Appreciate the focus from Microsoft on Partner security, MFA etc, but this is the first entry point for all our users. Microsoft should recognise these broad roles as a significant weak point, and address it soon.
I agree with @NickatTheta that the two roles in partner portal are far too broad an don't offer any level of true security.
Our specific problem, as a smaller MSP, is that when granting Admin agent to our staff which we were told is equivalent to Global Admin in the customers tenant, they don't actually get full Global Admin rights.
Some pretty basic functions (such as converting to and from Shared Mailboxes) are simply unavailable, and the worst thing about this is I cant find these restrictions documented anywhere!
Our work around, as we do have the full trust from our customers and complete control and ownership over their tenant, is create a global admin account in the customers tenant and share the credentials internally. (Stored securely in our encrypted Knowledge Base, and the account has MFA employed as well as our own accounts to access the KB before anyone raises a security issue on our end 😉 )
But doing this we lose any auditing or accountability internally of who did what. @JanoschUlmer can you offer any suggestions on what we should be doing? As a growing business created guest users in each customer tenant is something we had thought about but even as a business of our size that will quickly become an onerous task and as we look to increase customer and employee count will become even more unmanageable.
Alex C Brewer
@AlexCBrewer : I agree to and share your concerns, there are no really good solution to this.
Generally, the question if some action is supported to be done by an delegated admin is up to the decision of each product team, it is not something one (CSP) team alone can drive. So the feedback on missing functionality generally needs to be addressed in the specific teams - e.g. Uservoice: https://office365.uservoice.com/ . There are quite a few feedbacks on this already for different areas. Know areas are O365 Security & Compliance Center, some Sharepoint admin tasks, troubleshooting AAD Connect Sync issues. CSP engineering does of course also ask product teams to enable those scenarios, but still the decision is up the product team.
Then some of the features which are not available in the respective GUI, might still be possible using Powershell or the APIs. Sometimes it is just an issue on how the portal feature was designed, e.g. if current users group memberships are assessed.
Then having a shared global admin in the end customer tenant is a problem from compliance and auditing perspective, I fully agree. I know that Partner though about building their own PIM-system where Azure Automation was used to create admin identities on the fly and removing them. It is doable, but much work. Since admin accounts can exist in a customer tenant without having licenses applies some partners also create a number of non-shared admin accounts in order to assign them to specific users - some use shared accounts with MFA enabled and then use a centrally deployed token app (e.g. Authy running on a virtual workstation) so at least the most urgent security concerns are addressed.
I know that the identity team are working a more sophisticated delegated admin concept which might address some of the shortcomings, but it is to early to mention any specifics.